How to Use Nail Foil: Snakeskin and Black & White Designs

Quick Answer

To apply nail foil for snakeskin or black & white designs, start with a cured layer of Jessica Danielle Nails Transfer Foil Gel, press the foil on for a few seconds, then seal with Diamond Top Coat.

Step-by-Step Nail Foil Application

1. Prepare Your Nails: Clean, shape, and buff your nails. Apply a base coat and cure according to your lamp's instructions. This ensures the foil adheres to a smooth, oil-free surface. Skipping prep can cause the foil to lift within a day.
2. Apply Transfer Foil Gel: Brush a thin, even layer of Jessica Danielle Nails Transfer Foil Gel onto the nail. Avoid flooding the cuticles. Cure under a UV/LED lamp for 180 seconds. A thick layer may wrinkle; thin coats work best.
3. Press and Rub the Foil: Cut a small piece of your chosen foil (snakeskin or black & white). Place it matte side down on the cured gel. Press firmly and rub the surface for a couple of seconds. Peel away the backing to reveal the design. Rub longer on edges to avoid missing spots.
4. Seal with Top Coat: Apply a layer of Diamond Top Coat over the foil to protect the design. Cure fully. This step locks in the foil and adds gloss. Do not wipe the tacky layer until after curing.

Products Used in This Tutorial

• Foil- Snakeskin: Application: Apply Jessica Danielle Nails Transfer Foil Gel and cure for 180 seconds, press foil on the nail and rub for a couple seconds. Top Coat with our Diamond Top Coat. This snakeskin foil creates a textured pattern that stands out, and the 180-second cure ensures the gel is tacky enough to hold the foil securely.

  

• Foil-Black & White: Application: Apply Jessica Danielle Nails Transfer Foil Gel and cure for 180 seconds, press foil on the nail and rub for a couple seconds. Top Coat with our Diamond Top Coat. Black & white foil gives a crisp, clean design that works for both everyday wear and special occasions, and the same application steps apply for consistent results.